Skip to main content

Flowers in A Pocket Get Well Card

Making a get well card requires some extra creativity to do it's job - bring joy and happiness to the recipient. Here, we continue using our Denim Pocket Rubber Stamp, this time making a special and original greeting card.  Using beads to spell out part of the message gives it a unique 3-D effect.

The card above is a 5x7 greeting card made to look like a shirt. Using a pretty gingham pattern paper, the denim pocket stamp, and some pearl jewels, a 'get well' card is made that is creative and unisex.

First, choose your shirt design from a patterned paper and cut it to 5 inch x 7 inch. You will need a 1 inch strip of 7 inches (for the button line) and another 2 inch wide piece that is at least 4 inches long for the collar.

The button line strip of paper will need to be folded along the 2 long edges to give it a real shirt look.

Use back of an xacto knife and ruller to score your lines.
Hint: use an acrylic block to crease your lines.

Glue your folds on the back. Add stitches free hand using a white gel pen (optional, but a nice touch). Glue real buttons or use flat-back pearls; any jewel flat-back will look nice.

Take the wider strip of paper and decide where your collar will sit on the card. Draw a line using a ruler across the fold line. Hide the rest of the collar on the back and glue down.

For the bouquet in the pocket, I used our Floral Centerpiece Rubber Stamp. Stamp onto a light color card stock so it blends into the background of the gingham. Color in the flowers as you like. Then split the stamped design of flowers by cutting it at about the middle. You want them to sit next to each other above the pocket. I only had to trim one flower out of the design to make them look good when placed on the card.

For actual pocket.....
Because of my teal gingham paper pattern, I choose a solid teal card stock for the actual pocket and stamped it with StazOn Teal Blue. You can use any type of paper for your card, but I recommend a solid (not patterned) for stamping the pocket on so you can see it.

For the Get Well part, I used plastic beads strung onto teal colored wire and used green seed beads (round and bugle shaped) for spacers. 

I used an xacto knife to put a tiny hole in each corner of the pocket and fed the wire ends in.

On the back, simply use scotch tape to hold the wire down in place.

To attach the pocket to the card, use a glue stick (Elmers Extreme glue works wonderfully). You want the pocket to be flush with the card.

For the word, 'soon' of this Get Well card, I used different sizes and materials:  glitter letters, a plastic gear and a paper cut of an 'o' leftover from another project. I also added a few clear glue dots under some of the beads to hold them in place. You see the 'e' in the above photo is not glued down!

There's nothing like making someone feel special by creating a hand made card for them. It will raise their spirits and they will, most certainly, get better soon!

Rubber Stamps used in the project:

Denim Pocket Rubber Stamp

Floral Centerpiece Rubber Stamp

Popular posts from this blog

IPhone Cover Decor

Since Xyron has a fabulous way of making anything into a sticker, I decided to create d├ęcor for the back of my cell phone case. Taking beautiful, damask patterned glitter paper from DCWV, 6x6 pad, 'The Glitter Basics" I cut out my iPhone 6s cover pattern using a template I created in plain white cardstock of my case.  To cut out the circle in the middle, I used an X-Acto knife.     The Scooter Rubber Stamp was embossed on red paper and cut out with scissors.  I smudged 'Claret' color StazOn ink around the edges.       After placing the scooter through the Xyron Creative Station, I placed it onto the iPhone pattern and ran both through together.  The Creative Station can take such thick items.  You will see below that I ran embellishments made from shrink plastic and it had no problem with them. One of the magical features of the Xyron's sticker makers is that the top of your project comes out unscathed.  You just peel the plas

Vintage Transportation

Featured above on an A2 card: Indian Motorcycle Motorcycle Hardtail Motorcycle View all of our motorcycle rubber stamps here .  Featured stamp: Abandoned Truck  Classic Corvette Rubber Stamp  Classic Pickup Truck Rubber Stamp in green watercolor.  Rusty Tractor on a orange watercolor background.  Rusty Truck on a pink watercolor background. VW Bug in orange watercolor background.

Red, White, and...Thank You to Veterans

I know there are many card makers that create cards for our beloved veterans. For this 5 inch x 7 inch card, I am using our  International Thank You Rubber Stamp  to say "thanks" in a red, white and blue way! Create this Veterans Day card using our stamp that expresses gratitude in several languages. Also, some of our veterans come from many nationalities and this stamp works wonderfully for this card. Stamp the  International Thank You Rubber Stamp  onto a light colored card stock. This stamp measures approximately 3 inches by 3 inches. I used a marble card stock in this example. Stamp with it again onto a blue card stock and cut the words into pieces. Glue each of them vertically as banners on top of the matted card stock. The red mat is slightly larger than the marble card stock piece to allow for the blue word banners to have some place to show underneath the center piece. Our  United We Stand Rubber Stamp  is an awesome patriotic design featuring an eagle, flags, banner,